WRY Model hot oil pump
ข้อมูลจำเพาะ
รุ่น : WRY65-40-190
การไหล : 18 ลบ.ม./ชม
Lift : 40 ม.
ความเร็วในการหมุน : 2900 รอบ/นาที
กำลังไฟฟ้า : กำลังเพลา 6.7 กิโลวัตต์ , กำลังทั้งหมด 7.5 กิโลวัตต์
η : 52%
NPSH : 1.4 ม.

Specifications
Model : WRY65-40-190
Flow : 18 m³/h
Lift : 40 m
Rotation Speed : 2900 r/min
Power : shaft power  6.7 kw , all power 7.5 kw
η : 52%
NPSH : 1.4 m

Product Feature
- WRY series hot oil pump has been widely used in China's heat carrier heating system, and has entered various industrial fields
such as petroleum, chemical, rubber, plastic, pharmaceutical, textile, printing and dyeing, road construction, food, etc. The particle's
weakly corrosive high temperature liquid, using a temperature of ≤350 ° C, is an ideal hot oil circulation pump
- WRY series hot oil pump is the second generation product developed on the basis of digestion and absorption of foreign oil pump
by our factory. The basic structure is single-stage single-suction cantilever foot support structure. The inlet of the pump is axial suction,
the outlet is center-up vertically, and The motor is mounted on the base.
- The support of WRY series hot oil pump adopts the structure of double-end ball bearing support. The front end is lubricated with
lubricating oil, the rear end is lubricated with grease, and there is a guide oil pipe in the middle to observe the sealing condition and
recover the heat transfer oil at any time.
- Adopting the natural heat dissipation structure, the traditional water cooling structure is changed, the structure is simple, the volume
is small, the operation cost is saved, the performance is good, and the use is reliable.
- WRY series hot oil pump: (1) The combination of packing seal and mechanical seal, high temperature resistant packing for packing
seal, good thermal adaptability, and mechanical seal with high mechanical strength and good wear resistance The alloy material guarantees
the sealing performance under high temperature conditions.
- (2) The third-generation PTFE (abbreviated as PTFE) is used for the lip seal, which makes the sealing performance leap. It is 25 times
more reliable than the rubber seal and has strong corrosion resistance.